Ceiling. Tuesday , May 15th , 2018 - 11:04:09 AM
One of the most important things to consider when remodeling your basement is the basement ceiling. People find basement ceilings a bit hideous and if you are of the same opinion, then you need to do something about it. Most people want their basement to be warm and cozy, instead of that desolate look often acquainted with an unfinished basement. There are different basement ceiling ideas to make your ceiling a place that you want it to be. Basement ceilings may either be dry walled or suspended. You can choose which kind to install but always remember to add decorative touches in order to make them look exactly like any other rooms in your home.
Another reason to buy that can of paint is the fact that a colored ceiling softens the sharp contrast offered by your walls. For most people, walking into a room with dark red walls topped with an intensely white ceiling can be almost shocking! It isn't comfortable and cozy at all. To solve this problem, opt for a ceiling color that blends better with your wall color. If you have walls done in shades of jade, why not select a ceiling in ivory or beige? It's a softer hue that complements rather than contrasts with your walls.
1. Victorian Era Tin Ceilings They will take you back to a different era in time when life was at a slower pace and style grace still abound. They were originally used in the Victorian-Era. They were made to replace a must heavier type plaster ceiling. Over time it seems to me that design got pushed to the back burner and people just went for larger homes. I myself had rather have a smaller home with plenty of architectural detail. Splurge on your interior design using tin ceilings in at least one room and I think with the end result you will be glad you did.
Remember to tie a piece of caution tape on any water shutoffs, gas shutoffs, outside faucet shut offs, or anything else that you will want to access later after the drywall is permanently hung! Otherwise you will never be able to access these important items at a later date. Just tie caution tape right on the handles or the center of all of the items you will need to access later, then when the drywall ceiling is being hung, just cut a 2\" hole out of the drywall so that the caution tape can be pulled through that hole. After the drywall is finished and paint-ready we will be installing finished plastic access panels at each of these locations so we can easily access all of our mechanical items forever!
Acoustic ceiling tiles was another option, the tiles are easy to cut and their small size makes them very easy to handle. They are installed by stapling them to the furring strips but again we had to move pipes and ducts in order to provide suitable framing for a nice flat ceiling.
Well we are going to FRAME our way right around all of it, and it's really very simple to do! Looking at it now it might seem a little overwhelming, but what we will do is break the ceiling framing down into a few stages, starting with the framing of the duct-work 1st!
Quote from Great Room Ceiling Ideas :
Fitting panel molding corners may be used to make custom sized panels on both the walls and ceilings, which may subsequently be filled with some of the materials proposed previously. A number of the most well-known ceilings on the planet have been produced in this manner.
Copyright © 2017. sdlp.us. All Rights Reserved.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does sdlp.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.