Ceiling. Thursday , November 22nd , 2018 - 04:51:50 AM
Spending much time and money on your basement will surely depends on what you intend to do with it. You can spend a very small amount or you can spend a slight fortune. The best thing however is that, a large extent of the work you perform will augment your home's worth and appeal at any time you might come to a decision to sell it.
Now it's time to talk about that \"ceiling-scape\"! What is the \"ceiling-scape you ask? Well that's my new word for what's really UGLY overhead in the basement, the UGLY that's going to need to be hidden away from our view!
And then one day shopping with his family he saw what a store did with their ceiling and that was basically nothing. He asked the owner what they did and he said they basically cleaned the pipes and duct work, primered them and then used an airless sprayer to paint everything one color. It was perfect, we would not have to move any thing, no framing was necessary and to beat all it allowed for more head room.
Well we are going to FRAME our way right around all of it, and it's really very simple to do! Looking at it now it might seem a little overwhelming, but what we will do is break the ceiling framing down into a few stages, starting with the framing of the duct-work 1st!
Solution? Simply \"fir-down\"(or make lower) these sections of \"ceiling-scape\" with 2\"x4\"'s! Just nail-up long 16'-0\" sections of 2\"x4\"'s from end-to-end in all of these areas, running them parallel with the duct-work runs (perpendicular to the existing floor joists). By doing this we make these sections of ceiling 1-1/2\" lower, and this gets all of our framing below all the pipes and wires that used to be our drywall's road! We can now drywall right over everything that used to be in our way with ease!
A drywall ceiling required that we relocate most pipes and ducts into the joist cavities, or out to the perimeter of the room. Then we would have to place a wood frame to box in around anything that was still hanging below the line of the ceiling joists. Then we would have to place wooden furring strips where extra strength was be needed. It is necessary to use the furring and the framed boxes in order to provide a solid backing for the finished ceiling treatment. Drywall seemed like a good choice because of the low cost of the material but we weren't to thrilled about taping and sanding it later.
Quote from wood ceiling lighting ideas :
Handsaw, ought to be relegated into the ceiling joists. Building or panel glue should also be utilized. Due to the size of these panels, it is Ideal to have a Helper during setup. Opaque stains and acrylic latex paints within a primer may be used to reach some variety of appearances.
Copyright © 2017. sdlp.us. All Rights Reserved.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does sdlp.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.