Ceiling. Thursday , November 22nd , 2018 - 04:52:09 AM
Now it's time to talk about that \"ceiling-scape\"! What is the \"ceiling-scape you ask? Well that's my new word for what's really UGLY overhead in the basement, the UGLY that's going to need to be hidden away from our view!
A dropped or suspended ceiling is another option for your basement. These ceilings have a grid work of metal bars in the shape of an upside-down T, these are suspended on wires from the overhead joists. A dropped ceiling is great because there is no need for you to move wires, pipes or ducts and the joists don't have to be straight for the finished ceiling to look flat. This type of basement ceiling finishing will give you easy access to heating, cooling and electrical systems. Adding some lighting fixtures can be done with ease as well. In addition to that, a dropped ceiling shields unwanted noise from above. However, one of the biggest disadvantages of a dropped or suspended ceiling is that it eats up too much head space so if you already have a very low basement ceiling then you might want to look into this first.
Remember to tie a piece of caution tape on any water shutoffs, gas shutoffs, outside faucet shut offs, or anything else that you will want to access later after the drywall is permanently hung! Otherwise you will never be able to access these important items at a later date. Just tie caution tape right on the handles or the center of all of the items you will need to access later, then when the drywall ceiling is being hung, just cut a 2\" hole out of the drywall so that the caution tape can be pulled through that hole. After the drywall is finished and paint-ready we will be installing finished plastic access panels at each of these locations so we can easily access all of our mechanical items forever!
Well we are going to FRAME our way right around all of it, and it's really very simple to do! Looking at it now it might seem a little overwhelming, but what we will do is break the ceiling framing down into a few stages, starting with the framing of the duct-work 1st!
Acoustic ceiling tiles was another option, the tiles are easy to cut and their small size makes them very easy to handle. They are installed by stapling them to the furring strips but again we had to move pipes and ducts in order to provide suitable framing for a nice flat ceiling.
Coffered ceilings, on the other hand, are very similar in technical terms to suspended ceilings, but differ from them in being decorated with ornate recessed panels, offering a more corporate appearance, ideal for those who plan to turn their basement into a home office or formal study. The drawback of plain old suspended ceilings, on the other hand, lies in the industrial look they tend to give a room, which can be great if you're into Manhattan-style architecture and not-so-great if your house has been designed to look like a Tuscan villa. For practical purposes, they're great, as one can quickly access any wires pipes they conceal by snapping away segments of the ceiling. Most building codes require at least 90 inches of headroom for a finished basement, so in the event that your basement has a low ceiling, you have two options - either dig up the floor, or go for drywall.
Quote from wood ceiling lighting ideas :
If You want to have that timber paneling look but do not enjoy hoisting timber overhead, think about fiber planks, that are similar in makeup to acoustical tile however do not need a suspended grid. Armstrong's new Nation Classic Planks are a fantastic example.
Broad planks weigh just 21 ounce. The tongue-and-groove boards are easy to build, and may be attached directly to drywall or plaster using glue or staples.
Copyright © 2017. sdlp.us. All Rights Reserved.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does sdlp.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.