Ceiling. Tuesday , May 15th , 2018 - 10:13:31 AM
Well we are going to FRAME our way right around all of it, and it's really very simple to do! Looking at it now it might seem a little overwhelming, but what we will do is break the ceiling framing down into a few stages, starting with the framing of the duct-work 1st!
Basement ceiling finishing is not that difficult except if you do not have any experience at all when it comes to this kind of project. You may want to read about the general types of basement ceilings to get you started. The first one is the dry-walled ceiling. The drawback in this is that it requires a lot of labor and some rental equipment. It's harder to install and it can be quite messy than basement ceiling finishing systems. If you're worried about having access to pipes and wires running along your ceiling then you can integrate it in the design or provide an entrance. To emphasize the ceiling, you can use trimmings and attractive tiles.
We then entertained the idea of using T1-11 tongue and groove boards, again we would need to move pipes and ducts and the cost was a bit high. After some thought the look of this product just wasn't what he wanted.
The ceiling is one of the important aspects of your basement, we may find it ugly but don't worry because there are a lot of products available that can turn your ceiling into a work of art. The basement is naturally dark, cool and uninviting and people want the exact opposite which is warm and cozy. People can be very creative and achieving this is not a big deal anymore. There are several types of basement ceiling finishings and it's often confusing what works best for you. Basically, basement ceilings can be categorized to either be dry walled or suspended. Decorative touches will be a part of your finishing steps. Don't be afraid to experiment, be creative and think outside the box.
Ok you have designed your basement and come up with a winning floor plan! You have corrected any moisture or water problems. You laid-out your walls using the floor plan and permanently chalked lined those wall locations on the concrete floor in locations where they will be built.
A drywall ceiling required that we relocate most pipes and ducts into the joist cavities, or out to the perimeter of the room. Then we would have to place a wood frame to box in around anything that was still hanging below the line of the ceiling joists. Then we would have to place wooden furring strips where extra strength was be needed. It is necessary to use the furring and the framed boxes in order to provide a solid backing for the finished ceiling treatment. Drywall seemed like a good choice because of the low cost of the material but we weren't to thrilled about taping and sanding it later.
Copyright © 2017. sdlp.us. All Rights Reserved.
Any content, trademark/s, or other material that might be found on this site that is not this site property remains the copyright of its respective owner/s. In no way does sdlp.us claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.